Simple tools needed for air conditioner repair Orlando

For a hot and humid weather like that in Florida, you need a good air conditioner Orlando. Despite owning ac Orlando of the best brand, you have to face some problems. When such problems arise you need to have some essential simple tools which will come to your rescue and you can perform some HVAC repair Orlando on your own. So, don’t wait for expensive professional to fix your ac unit. Have an access to such tools and simplify your task. Screwdrivers can be used to tighten the screws of the fan blades and the motor. When the blades of the fan are loose, they tend to make the air conditioning Orlando noisy.

Screws of the motor on getting loose too make the ac unit noisy. An air conditioner unit stops working because it gathers dust and debris which blocks the fan preventing the circulation of air out of the back of the unit. Just a simple piece of cloth can be used to wipe out the dust. Remove the blades and clean the dust. Sometimes the blades get stuck and lubricating it with oil will help you to get the fan working. Take care that the oil is the specific one meant for the air conditioners.

Hyper Smash Blog Ping Site

Fixing trivial ac problems on your own

One can’t do without air conditioning in Orlando. At times you might come across a situation when your ac unit suddenly breaks down. If your Orlando air conditioning unit is in need of repair, you can make some preliminary maintenance checks around your system to see if you can carry out the task yourself. Firstly, while performing the ac unit repair Orlando on your own check whether or not your air conditioning is working at the circuit breaker. Open the breaker box and make a thorough check of all the main fuses connected to the circuit that runs your heating or air conditioning system. If one or more fuses have tripped, you can just flip them back on. If a fuse is blown, replace it immediately. Orlando ac repair is not all that easy. The evaporator coil should be checked to make sure there is no dust build up on the surface of the coil. Remove the cover from the unit and disconnect the coil. Remove any pipes and tubes and replace the unit with a new one. Ice build-up occurs when there is low air flow through the evaporator coil. The evaporator coil can easily be damaged if the ice buildup is too severe. Problems with the refrigeration system can cause a pressure drop in the evaporator coil, which will allow moisture to freeze and accumulate on the coil.